Products
BMA Bottom Magnetic Agitator

The range of magnetic agitators BMA is a highly hygienic solution for the applications of dispersion, dissolution, homogenization and mixing in the pharmaceutical, biotechnological and food-processing industries. Due to the magnetic coupling they are especially useful because they avoid any possible contact of the product with the atmosphere.

 

BCI Vertical Agitator

The range of the BCI agitators presents vertical direct motor-driven agitators. These agitators are used in the processes of mixing, dissolution, dispersion and maintenance whenever powerful and high-speed agitation is required in the food processing, cosmetics, pharmaceutical or chemical industries. The agitators are normally fitted to small volume tanks of up to 1.500 liters for work with low-viscosity products.

 

NHS Vertical Agitator

The NHS agitators are vertical agitators with worm gearmotor. They can be used in mixing, dissolution and maintenance processes where a mild to medium mixing is required. This agitator is designed for the food-processing, cosmetic and pharmaceutical industries and it is provided with the most suitable finish for each industry. The NHS agitator can be used in tanks of up to 10.000 L with products of medium to high viscosity.

 

CXC Agitators with Mechanical Seal

EMS offers a wide range of agitators designed for work in sealed tanks intended for some sterile processes of the pharmaceutical industry. The agitators can be used under pressure, atmospheric pressure or vacuum. They can also be incorporated into fermenters. The most common applications are maintenance of plasma and cell cultures, preparation of various pharmaceutical formulations.

 

U-Shaped Anchor

The U-shaped anchor is designed for a broad range of viscosities. It can be used in mixing, dissolving and homogenization processes. Depending on the application, it has a variable speed operation ranging from 3 to 120 rpm. This type of anchor is normally complemented by one or more radially-mounted agitators or a radial flow deflector system. Scrapers can be incorporated for products that are likely to adhere to the tank's walls. In double-walled tanks, the scrapers also help transfer heat to the product. Applications include: melting products, jams, temperature control, etc.

Anchor with Radial Flow Deflector

This agitator comprises an anchor with a central shaft and blades. These are complemented by one or two static radial flow deflectors with blades. These features mean it can operate in a broad range of viscosities. Depending on the application, it has a variable speed operation ranging from 3 to 120 rpm. Scrapers can be incorporated for products that are likely to adhere to the tank's walls. In double-walled tanks, the scrapers also help transfer heat to the product. Applications include: cosmetic creams, ointments, pâtés, etc.

 

U-Shaped Anchor with Blade

The U-shaped anchor with blade is designed with a central shaft. The shaft is fitted with angled radial blades to help mix the product. It is used to prepare very good mixtures of medium-viscosity products. Depending on the application, it has a variable speed operation ranging from 3 to 120 rpm. Scrapers can be incorporated for products that are likely to adhere to the inside of the tank's walls. In double-walled tanks, the scrapers also help transfer heat to the product. Applications include: mixing chocolate-based products, cream solutions, dairy products, etc.

 

Helical Ribbon-Type Anchor

The helical ribbon anchor is the best solution for mixing liquid products with solids or only granulated solids, without damaging them. It operates over a broad range of viscosities. Mixing times are short and a homogeneous final product is obtained. These agitators are capable of strongly displacing the product from top to bottom, even at very high viscosities. The near impossibility of creating turbulence in viscous and non-Newtonian materials means that all of the liquid is in motion, ensuring excellent mixing. Depending on the application, it has a variable speed operation ranging from 3 to 200 rpm. Scrapers cannot be fitted to this type of agitator. Applications include: food products, pharmaceutical and cosmetic products, paints, varnishes, polymers, ground rubber, lubricants, granulated solids, etc.

 

Loop-Type Anchor

The loop-type anchor is designed for high-viscosity products. This type of anchor is always supplied with a radial turbine agitator. This model is ideal for flushing viscous product towards the area of the radial agitator in order to help disperse the product being processed. The final product is a homogeneous mixture. Depending on the application, it has a variable speed operation ranging from 3 to 80 rpm. Scrapers can be incorporated for products that are likely to adhere to the tank's walls. In double-walled tanks, the scrapers also help transfer heat to the product. Typical applications are: mastic, plastisols, silicones, etc.

 

Helical Loop-Type Anchor

The helical loop-type anchor is designed for high-viscosity products. Depending on the application, it has a variable speed operation ranging from 3 to 120 rpm. Scrapers can be incorporated for products that are likely to adhere to the tank's walls. In double-walled tanks, the scrapers also help transfer heat to the product. Applications include: mixing polymers, food products, creams, lotions, pastes, granulated solids, etc.

 

Propeller-type agitators

Propeller-type agitators can be used for suspension, dispersion and homogenization processes with low-viscosity products, where it is important to operate at medium and high speeds. These agitators can be mounted in tanks with rounded or conical bottoms. Propellers are axial flow agitators, ideal for solid-in-liquid solutions or suspensions because they prevent solid particles from depositing on the bottom of the tank. They can also be used for mixing liquids. Depending on the application, deflectors or flow deflector baffles can also be mounted in the tank. All propeller-type agitators can be accompanied by an anchor-type agitator.